Smooth and Textured Finishes

Powder coats are available in hundreds (if not thousands) of standard colors, gloss levels, and textures. High gloss, semi-gloss, flat, and matte finishes are available in most any color. Clear, metallic, hammertone, wrinkle, transparent, fluorescent, glow-in-the-dark, glimmer, vein/antique, and even holographic finishes are also readily available. Powders are available to match PANTONE® and RAL color standards, and when all else fails custom powders can be ordered to match any sample you bring in.

The coating compositions of this invention are dry, free-flowing powders that may be used in fusion coating processes. "Fusion coating processes" are here defined as those coating processes in which coating powder paints are distributed over a substrate (which may be hot or cold); and heat, supplied from the substrate or an external source, fuses the powders into a continuous film. Examples of fusion coating processes include fluidized bed, electrostatic spraying, hot flocking (with or without electrostatic spray), and cloud chambers. When coating powders are based upon heat curing resins, as is the case of the epoxy resins of this invention, sufficient heat in excess of that required to fuse the powders must be available to cure the coatings and fully develop their physical and chemical properties.

Powder coating compositions are known in the art which produce textured or wrinkled finishes. For example, U.S. Pat. No. 4,341,819, the teachings of which are incorporated herein by reference, describes an powder coating composition useful for producing wrinkle finishes.

Current techniques in formulating textured powder coatings require balancing particle size, resin-viscosity and filler loadings to restrict the melt flow of the material thereby causing a coating surface with various degrees of orange peel or texture. Uniformity of texture is somewhat difficult to achieve and control on a consistent basis due to normal variations in raw materials and processing. Many of these formulations are difficult to apply electrostatically because of the high filler concentrations needed to produce the desired texture.

Metallic/Pearl Powder Coating

Introduction

This series of product are made of organic powder coating mixed with metal or pearl pigment such as aluminum and silver, copper and gold, pearl, etc. suitable for indoor and outdoor environment to use. It has various colorful metal shining effects and easy applied, good mechanical properties and chemical resistance.

Suggestion: Use clear powder coatings as protector to ensure its weatherability.

Series

1. Standard curing （180℃/15min）and lower temperature curing are available.
2. Made to various of gloss and color: high gloss (Above 86º), flat gloss (50～85º), semi gloss （10～49º）and no gloss (below 10º), gloss and color of product is made according to clients requirement.
3. Various kinds of art texture products are available, such as sandy, wrinkle, lanose grain, hammer tone, metal effect, etc.
   
   

Application

This type of product is specially designed for domestic appliance, shop shifts, furniture metal stand, fitness facilities, industrial equipment, hardware, lamps, toys, etc.

Clear Powder Coating

Introduction

This series of products are mainly made of hydroxyl polyester and curing agent, it is a kind of high transparent powder coating with excellent leveling.

Series

Standard curing （180℃/15min）

Application

1. Automobile topcoat, aluminum wheel, outdoor topcoat, indoor metal parts and garden equipment.
2. Various metalwork as clear top coatings, e.g. metal furniture, hardware, bicycle, handle, arts and crafts.
3. It can be used as top coat of metallic powder coatings.